FlipOver Endurance Tester for Manual Tailgate Spindle Drives

To optimize quality assurance and product validation, SPIE AUTOMATION developed a test bench for functional and endurance testing of manual tailgate spindle drives on behalf of an automotive customer. The system tests various spindle variants under realistic mechanical and climatic conditions. It is suitable for development, validation, and lifecycle testing, as well as production quality assurance. Thanks to its flexible design, different spindle types can be tested quickly and easily.

View of the test bench. Two cars with open trunks are shown on the right.
Fig.: FlipOver endurance tester for manual tailgate spindle drives © SPIE AUTOMATION

Challenge and Objective

The customer faced the challenge of reliably verifying the quality of its tailgate spindle drives while testing component service life as quickly and reproducibly as possible. The objective was to simulate component behavior under climatic conditions matching those encountered in real-world vehicle operation. This aimed to shorten development cycles, validate products faster, and ensure long-term quality.

The project’s goal was to engineer a fully functional test bench for manual tailgate spindle drives used to open and close vehicle luggage compartments. The system had to test a wide variety of spindle variants under realistic conditions, providing actionable results for engineering and quality assurance workflows.

Particular emphasis was placed on intuitive, straightforward operation. The software needed to be designed so that both experienced operators and new or occasionally trained staff could operate the test bench safely and efficiently. At the same time, the mechanical system required a flexible setup to allow rapid retooling for different lengths, variants, and designs of tailgate spindles. This enabled swift changeovers and cost-effective execution of diverse test orders.

Solution

The project was implemented by the SPIE AUTOMATION branch in Haßfurt. Mechanical engineering, software development, electrical design, test bench manufacturing, and control cabinet construction worked hand in hand, supporting the project from the initial concept phase through to commissioning.

The process began with a detailed review of the functional specification to capture all mechanical, electrical, and software requirements. A key focus was placed on required operating conditions, interfaces, and limit values essential for reliable, continuous operation.

Based on these specifications, the mechanical design of the test bench was created. The concept was coordinated with the customer and released for production. In parallel, all electrical components were selected, using exclusively high-grade parts that satisfy stringent demands for precision, reliability, and operational safety.

The complete system concept—encompassing mechanical systems, electrical engineering, and software architecture—was then presented to the customer and finalized collaboratively. Following sign-off, manufacturing of the test bench began. Concurrently, electrical schematics were drawn up, the control cabinet was built, and the software was adapted to the new hardware.

Once mechanical and electrical assembly were complete, electrical installation and initial hardware commissioning took place. In the next step, the PC application was integrated, and the entire system was fully commissioned. All functions were rigorously tested, validated, and verified for continuous operation reliability.

At project completion, SPIE AUTOMATION supplied comprehensive technical documentation, including circuit diagrams, bills of materials, software specifications, operating manuals, and safety assessments. Furthermore, the test rig was engineered in compliance with all applicable CE standards and directives before handover to the customer.

Benefits

With this new test bench, the customer gains a powerful solution for rapid, reproducible endurance and functional testing. Different tailgate spindle types can be tested with minimal retooling effort, significantly streamlining development and validation workflows.

The intuitive user interface reduces training requirements and enables dependable operation even by less experienced personnel. At the same time, advanced measurement technology and the realistic simulation of mechanical and environmental stresses deliver meaningful test data and sustainable quality assurance.

Thanks to its flexible architecture, the test bench is future-proof and can economically accommodate upcoming product variants.

These SPIE AUTOMATION Strengths Were Applied

About our customer
Our customer is a global automotive supplier that develops and manufactures components and systems for diverse vehicle applications.

Industry
Automotive

“This solution provides the customer with a future-proof test bench. We are especially pleased to have delivered the system on schedule and in full accordance with specifications. Thanks to modern measurement technology, flexible design, and effortless operation, the customer now has a sustainable platform for future testing requirements.”

Uwe Schweinfest
Head of Testing Technology
SPIE AUTOMATION

Do you already have a project in mind?

We’re happy to assist you with planning and implementation.

Contact Us
Contact

Who would you like to contact?

Manfred Hirt

Manfred Hirt

Bereichsleiter Automatisierung
Pfullendorf

+49 7552 936 120
Achim Fischer

Achim Fischer

Bereichsleiter Automatisierung
Niedernberg

+49 6028 9915 425
Mark Oliver Passauer

Mark Oliver Passauer

Bereichsleiter Digitalisierungslösungen
Pfullendorf, Niedernberg

+49 7552 936 228
Thorsten Kulik

Thorsten Kulik

Abteilungsleiter Vertrieb und Geschäftsentwicklung
Pfullendorf

+49 7552 936 332
Robert Lambertz

Robert Lambertz

Bereichsleiter Verfahrenstechnik und Leichtbaurobotik & Intralogistik
Dormagen

+49 2133 979 0123
Konstantinos Baltzis

Konstantinos Baltzis

Bereichsleiter Montage & Verlagerung
Eltmann, Eching

+49 89 8566 3311
Björn Blochwitz

Björn Blochwitz

Bereichsleiter Montage & Verlagerung
Dormagen, Gescher, Dresden, Merseburg

+49 2133 979 0120
Lukas Mayer

Lukas Mayer

Bereichsleiter Mechanische Konstruktion
Pfullendorf

+49 7552 936 182
Uwe Schweinfest

Uwe Schweinfest

Bereichsleiter Prüftechnik
Haßfurt

+49 9521 618 133
Andreas Bauer

Andreas Bauer

Geschäftsführer (Vors.)

+49 8031 2960-0
Rainer Lange

Rainer Lange

Geschäftsführer

+49 8031 2960-0
Martin Gräb

Martin Gräb

Geschäftsführer

+49 8031 2960-0
Bernhard Ritschel

Bernhard Ritschel

Geschäftsführer

+49 8031 2960-0
Christian Danninger

Christian Danninger

Standortleiter Oberwang

+43 5 7889 0
Andreas Enhuber

Andreas Enhuber

Standortleiter Wels

+43 5 7889 0
Daniel Bader

Daniel Bader

Standortleiter Feldkirchen

+43 5 7889 21
Emrah Kahraman

Emrah Kahraman

Managing Director

+49 171 2275565
Rui Fontes

Rui Fontes

Sales Manager & Technical Lead
#SPIE EXCELSIUS

+49 160 4933 166
Serhii Khodak

Serhii Khodak

Sales Manager
#SPIE EXCELSIUS

+49 160 9621 7800
Arnulf Thieme

Arnulf Thieme

Sales & Technical
Furnace & Refractory Inspection Specialist
#SPIE FIOS

+49 151 1400 2810
Fabian Strahl

Fabian Strahl

Sales - Nord

+49 151 55445467
Thorsten Nilles

Thorsten Nilles

Sales - Süd

+49 172 7399994
Thomas Gröne

Thomas Gröne

Geschäftsführung

+49 5424/2353-0
Justin Jones

Justin Jones

Managing Director

+1 (859) 276-1570
Martin Skladal

Martin Skladal

Geschäftsführung

+49 170 4501810
Uwe Harlacher

Uwe Harlacher

Sales IMO Anlagenmontagen

+49 172 7399985
Robert Klöpper

Robert Klöpper

Sales IMO Anlagenmontagen

+49 151 52632652
Sebastian Albrecht

Sebastian Albrecht

Leiter Vertrieb

+49 341 9084014
Sascha Herz

Sascha Herz

COO

+49 911 376737-0
Alf Kain

Alf Kain

CEO

+49 911 376737-0
Rim Abdmouleh

Rim Abdmouleh

Sales

+49 172 5113343
Marc Bogenstahl

Marc Bogenstahl

Director Business Development & Sales

+49 6201 503 100
Dirk Nagraszus

Dirk Nagraszus

Geschäftsführer

+49 8031 2960-0
Stefan Stemmle

Stefan Stemmle

Prokurist / Senior Engineer

+49 6241 3093212
Sascha Dilger

Sascha Dilger

Projektleiter Waste Management / Entsorgung

+49 6241 3093213
Maren Bögel

Maren Bögel

Assistenz der Geschäftsführung

+49 89 379090-22
Mark Jansen

Mark Jansen

Sales

+31 627 229 162
Serpil Tuncal

Serpil Tuncal

Sales

+31 621 654 773
Rowan Doorduin

Rowan Doorduin

Sales

+31 624 149 749
Javier Amelivia

Javier Amelivia

Managing Director / SPIE WIND Europe

+34 649 180 735
Tim Petersen

Tim Petersen

Managing Director / SPIE WIND Baltics

+48 669 192 221
Stefanie Weber

Stefanie Weber

Human Ressources / SPIE WIND

+49 421 399 87 470
Jean-Philippe Enzer

Jean-Philippe Enzer

Country Manager France

+33 6 59 21 82 10
Ernesto Mora

Ernesto Mora

Sales / SPIE WIND Lateinamerika

+52 15 5 51 73 63 79
Dennis Mausberg

Dennis Mausberg

Leiter Geschäftsbereich ISW

+49 89 54843970

Are you a media representative and would like to receive further information about SPIE? Then visit the press team of SPIE Germany Switzerland Austria:

Press Contact

May we help you?

Please leave us a message, we will contact you as soon as possible!

Our AI search gets you where you need to go

Our AI-powered search helps you find relevant content faster. Simply enter a question or describe your topic in one sentence.