Fully automated end-of-line acoustic test bench for fresh-air grilles increases process reliability

SPIE AUTOMATION developed and implemented an end-of-line acoustic test bench for 100% testing of fresh-air grilles in series production. The aim of the project was to create a highly precise, reproducible yet flexible test solution that reliably covers different product variants and can be seamlessly integrated into existing production processes.

The image shows the acoustic test bench with two screens.
Fig.: End-of-line acoustic test bench © SPIE AUTOMATION

Challenge and Objective

The customer faced the challenge of implementing an acoustic end-of-line test for its products for the first time. There were no relevant empirical values or existing test systems. At the same time, the requirement was to develop a solution that can test a wide range of fresh-air grille variants reliably and reproducibly. The goal was therefore to create a flexible test-bench concept that meets current requirements and can also accommodate future product variants with ease. The basis was the customer’s existing modular workstation concept, which was specifically expanded and technically enhanced. A particular challenge was the design of the acoustic measurement technology. It had to be engineered to deliver precise and stable measurement results even under real production conditions. At the same time, external interference such as airborne and structure-borne noise had to be consistently minimized. This was achieved through a decoupled test setup, damped machine feet, and a specially designed loading door.

Solution

The project was implemented by an interdisciplinary team from the SPIE AUTOMATION Haßfurt branch, covering design engineering, software development, electrical design, test-bench construction, and control cabinet manufacturing. The development process was clearly structured and divided into several phases. First, the specifications were analyzed in detail to fully capture all functional and technical requirements. Based on this, the mechanical design of the test bench was created, developed in close coordination with the customer, and approved. In parallel, all electrical components were selected and a holistic system concept spanning mechanics, electrics, and software architecture was created. This was coordinated with the customer and approved as the basis for further implementation. After the planning phase was completed, manufacturing of the mechanical components began, along with the build-up of the electrical infrastructure including the control cabinet. At the same time, the software was developed to support both manual and automated test sequences and to allow flexible adjustment of test parameters. This was followed by electrical installation and the step-by-step commissioning of the system. Integration of the acoustic measurement software was the final step, followed by comprehensive validation of all functions. For quality assurance, the acoustic measurement was additionally verified through comparative measurements with the end customer. The sensors used were checked with calibrated reference devices and validated using special test programs. Finally, the complete technical documentation was prepared and the system’s CE conformity ensured. Handover to the customer included all required documents for safe and smooth operation. The system enables fully automated testing of all relevant functions and quality features. These include, among other things, acoustic evaluation of the adjustment motors, electrical tests, camera-based inspections, and complete documentation and traceability of all measurement data. Thanks to its modular design with interchangeable test fixtures, the test bench can be used flexibly for different component types.

Benefits

With the implemented solution, the customer now has a fully automated test system that enables complete end-of-line testing without manual intervention. This significantly increases process reliability, reproducibility, and efficiency in production. The modular design of the test bench allows quick adaptation to new product variants. At the same time, the intelligent software architecture ensures that future changes in acoustic evaluation can be implemented flexibly and with minimal effort. Full data storage and traceability of all test results also ensure a high level of transparency and audit readiness.

These SPIE AUTOMATION Strengths Were Applied

About our customer
Our customer is an internationally active industrial company focused on the development and production of technologically sophisticated components and systems. With decades of experience, it is one of the established global providers of innovative solutions for various industrial applications.

Industry
Automotive supplier

The image shows the removed change plate.
Fig.: Change plate (removed) © SPIE AUTOMATION

With this solution, we provide the customer with maximum flexibility and efficiency—thanks to a scalable acoustic measurement solution that reliably meets future requirements as well. I am very satisfied with the project implementation, as we were able to deliver several test systems on schedule from a single source and exactly to the customer’s specifications. The solution meets all technical requirements while also offering maximum flexibility for testing a wide range of types.

Christoph Eller
Software
SPIE AUTOMATION

Do you already have a project in mind?

We’re happy to assist you with planning and implementation.

Contact Us
Contact

Who would you like to contact?

Manfred Hirt

Manfred Hirt

Bereichsleiter Automatisierung
Pfullendorf

+49 7552 936 120
Achim Fischer

Achim Fischer

Bereichsleiter Automatisierung
Niedernberg

+49 6028 9915 425
Mark Oliver Passauer

Mark Oliver Passauer

Bereichsleiter Digitalisierungslösungen
Pfullendorf, Niedernberg

+49 7552 936 228
Thorsten Kulik

Thorsten Kulik

Abteilungsleiter Vertrieb und Geschäftsentwicklung
Pfullendorf

+49 7552 936 332
Robert Lambertz

Robert Lambertz

Bereichsleiter Verfahrenstechnik und Leichtbaurobotik & Intralogistik
Dormagen

+49 2133 979 0123
Konstantinos Baltzis

Konstantinos Baltzis

Bereichsleiter Montage & Verlagerung
Eltmann, Eching

+49 89 8566 3311
Björn Blochwitz

Björn Blochwitz

Bereichsleiter Montage & Verlagerung
Dormagen, Gescher, Dresden, Merseburg

+49 2133 979 0120
Lukas Mayer

Lukas Mayer

Bereichsleiter Mechanische Konstruktion
Pfullendorf

+49 7552 936 182
Uwe Schweinfest

Uwe Schweinfest

Bereichsleiter Prüftechnik
Haßfurt

+49 9521 618 133
Andreas Bauer

Andreas Bauer

Geschäftsführer (Vors.)

+49 8031 2960-0
Rainer Lange

Rainer Lange

Geschäftsführer

+49 8031 2960-0
Martin Gräb

Martin Gräb

Geschäftsführer

+49 8031 2960-0
Bernhard Ritschel

Bernhard Ritschel

Geschäftsführer

+49 8031 2960-0
Christian Danninger

Christian Danninger

Standortleiter Oberwang

+43 5 7889 0
Andreas Enhuber

Andreas Enhuber

Standortleiter Wels

+43 5 7889 0
Daniel Bader

Daniel Bader

Standortleiter Feldkirchen

+43 5 7889 21
Emrah Kahraman

Emrah Kahraman

Managing Director

+49 171 2275565
Rui Fontes

Rui Fontes

Sales Manager & Technical Lead
#SPIE EXCELSIUS

+49 160 4933 166
Serhii Khodak

Serhii Khodak

Sales Manager
#SPIE EXCELSIUS

+49 160 9621 7800
Arnulf Thieme

Arnulf Thieme

Sales & Technical
Furnace & Refractory Inspection Specialist
#SPIE FIOS

+49 151 1400 2810
Fabian Strahl

Fabian Strahl

Sales - Nord

+49 151 55445467
Thorsten Nilles

Thorsten Nilles

Sales - Süd

+49 172 7399994
Thomas Gröne

Thomas Gröne

Geschäftsführung

+49 5424/2353-0
Justin Jones

Justin Jones

Managing Director

+1 (859) 276-1570
Martin Skladal

Martin Skladal

Geschäftsführung

+49 170 4501810
Uwe Harlacher

Uwe Harlacher

Sales IMO Anlagenmontagen

+49 172 7399985
Robert Klöpper

Robert Klöpper

Sales IMO Anlagenmontagen

+49 151 52632652
Sebastian Albrecht

Sebastian Albrecht

Leiter Vertrieb

+49 341 9084014
Sascha Herz

Sascha Herz

COO

+49 911 376737-0
Alf Kain

Alf Kain

CEO

+49 911 376737-0
Rim Abdmouleh

Rim Abdmouleh

Sales

+49 172 5113343
Marc Bogenstahl

Marc Bogenstahl

Director Business Development & Sales

+49 6201 503 100
Dirk Nagraszus

Dirk Nagraszus

Geschäftsführer

+49 8031 2960-0
Stefan Stemmle

Stefan Stemmle

Prokurist / Senior Engineer

+49 6241 3093212
Sascha Dilger

Sascha Dilger

Projektleiter Waste Management / Entsorgung

+49 6241 3093213
Maren Bögel

Maren Bögel

Assistenz der Geschäftsführung

+49 89 379090-22
Mark Jansen

Mark Jansen

Sales

+31 627 229 162
Serpil Tuncal

Serpil Tuncal

Sales

+31 621 654 773
Rowan Doorduin

Rowan Doorduin

Sales

+31 624 149 749
Javier Amelivia

Javier Amelivia

Managing Director / SPIE WIND Europe

+34 649 180 735
Tim Petersen

Tim Petersen

Managing Director / SPIE WIND Baltics

+48 669 192 221
Stefanie Weber

Stefanie Weber

Human Ressources / SPIE WIND

+49 421 399 87 470
Jean-Philippe Enzer

Jean-Philippe Enzer

Country Manager France

+33 6 59 21 82 10
Ernesto Mora

Ernesto Mora

Sales / SPIE WIND Lateinamerika

+52 15 5 51 73 63 79
Dennis Mausberg

Dennis Mausberg

Leiter Geschäftsbereich ISW

+49 89 54843970

Are you a media representative and would like to receive further information about SPIE? Then visit the press team of SPIE Germany Switzerland Austria:

Press Contact

May we help you?

Please leave us a message, we will contact you as soon as possible!

Our AI search gets you where you need to go

Our AI-powered search helps you find relevant content faster. Simply enter a question or describe your topic in one sentence.