Flexible unwinding station boosts productivity and reduces setup times

SPIE AUTOMATION and our partner company SPIE ESCAD Austria implemented an unwinding station with an electromechanical roller drive and radio remote control for our client, WIMO Hebetechnik GmbH. The goal was a quick, clean custom solution beyond standard offerings.

The unwinding station is shown. In the background, an industrial hall with logistics can be seen.
Fig.: Unwinding station with radio remote control © SPIE AUTOMATION

Challenge and Objective

WIMO Hebetechnik GmbH required additional capacity for the electrical design of special versions. In the “Unwinding Station” project, a radio remote control from HBC-radlomatic GmbH was to be used for the first time – instead of the previously used control pendant. The objective was clear: react quickly, provide a technically sound solution, and prove that even highly complex special requirements can be implemented reliably and at short notice.

Solution

The implementation was carried out jointly by the SPIE AUTOMATION and SPIE ESCAD Austria team. The starting point was an existing project copy that had already been prepared by the client. When adapting the title page, it became apparent that the operating concept had fundamentally changed. WIMO Hebetechnik GmbH then contacted the SPIE AUTOMATION and SPIE ESCAD Austria team with specific information about the desired radio remote control. After receiving the EPLAN-ZW1 file, the detailed work began. Since not all technical details were clear at the beginning, the circuit diagram was constructively prepared – deliberately forward-looking, but without premature commitments. In parallel, it quickly became clear that implementation would not be possible without direct coordination with HBC-radlomatic GmbH. After a few days of feedback, the necessary information and the radio remote control manual were available. Based on this, the planning could be finalized, the circuit diagram adjusted, and the project fully implemented. The result is an unwinding station with an electromechanical roller drive that enables the safe rotation of coils around the horizontal axis. The end of the strip can be precisely positioned – for example, for sampling. Recesses in the rollers and guide rails allow strapping to be attached and removed even when loaded. Integrated forklift pockets ensure easy and safe transport and make the system flexibly deployable.

Benefits

With this solution, WIMO Hebetechnik GmbH strengthens its competitive position and increases the chances of being requested more frequently for future projects, including larger ones. The end customer benefits from safe and comfortable control via radio remote control, which can be easily transferred to other systems. The basis for this is a robust unwinding station with an electromechanical roller drive that enables controlled rotation of the coil. Guide rails and roller recesses allow safe handling of the strapping even when loaded, and integrated forklift pockets ensure easy transportability. The result is precise positioning options, reduced setup times, and flexible use of the system – from coil handling and testing equipment to workshops in metal and steel construction.

These SPIE AUTOMATION Strengths Were Applied

The logo of WIMO Hebetechnik GmbH is shown

About Our Client

Based in Woringen (Bavaria), WIMO Hebetechnik GmbH is one of the specialized manufacturers of high-quality load handling attachments, hoists, and turning devices for heavy loads. Since 1987, the company has been implementing customer-specific solutions for industry, including coil tongs, press tool tongs, and traverses.

Industry
Plant engineering and conveying technology

The image shows an excerpt from the circuit diagram after implementation.
Fig.: Excerpt from the circuit diagram after implementation © SPIE AUTOMATION

We commissioned SPIE AUTOMATION to integrate external expertise in industrial automation and electrical design. The goal was to supplement our internal capacities, reduce project risks, and ensure efficient and standard-compliant implementation of technical requirements. The creation of the E-Plan and the risk assessment were commissioned. We find the cooperation with SPIE AUTOMATION to be very professional and reliable. Projects are implemented in a structured manner. Communication is always transparent and solution-oriented.

Claudio Cucchiara
Head of Electrical Department
WIMO Hebetechnik GmbH

Do you already have a project in mind?

We’re happy to assist you with planning and implementation.

Contact Us
Contact

Who would you like to contact?

Manfred Hirt

Manfred Hirt

Bereichsleiter Automatisierung
Pfullendorf

+49 7552 936 120
Achim Fischer

Achim Fischer

Bereichsleiter Automatisierung
Niedernberg

+49 6028 9915 425
Mark Oliver Passauer

Mark Oliver Passauer

Bereichsleiter Digitalisierungslösungen
Pfullendorf, Niedernberg

+49 7552 936 228
Thorsten Kulik

Thorsten Kulik

Abteilungsleiter Vertrieb und Geschäftsentwicklung
Pfullendorf

+49 7552 936 332
Robert Lambertz

Robert Lambertz

Bereichsleiter Verfahrenstechnik und Leichtbaurobotik & Intralogistik
Dormagen

+49 2133 979 0123
Konstantinos Baltzis

Konstantinos Baltzis

Bereichsleiter Montage & Verlagerung
Eltmann, Eching

+49 89 8566 3311
Björn Blochwitz

Björn Blochwitz

Bereichsleiter Montage & Verlagerung
Dormagen, Gescher, Dresden, Merseburg

+49 2133 979 0120
Lukas Mayer

Lukas Mayer

Bereichsleiter Mechanische Konstruktion
Pfullendorf

+49 7552 936 182
Uwe Schweinfest

Uwe Schweinfest

Bereichsleiter Prüftechnik
Haßfurt

+49 9521 618 133
Andreas Bauer

Andreas Bauer

Geschäftsführer (Vors.)

+49 8031 2960-0
Rainer Lange

Rainer Lange

Geschäftsführer

+49 8031 2960-0
Martin Gräb

Martin Gräb

Geschäftsführer

+49 8031 2960-0
Bernhard Ritschel

Bernhard Ritschel

Geschäftsführer

+49 8031 2960-0
Christian Danninger

Christian Danninger

Standortleiter Oberwang

+43 5 7889 0
Andreas Enhuber

Andreas Enhuber

Standortleiter Wels

+43 5 7889 0
Daniel Bader

Daniel Bader

Standortleiter Feldkirchen

+43 5 7889 21
Emrah Kahraman

Emrah Kahraman

Managing Director

+49 171 2275565
Rui Fontes

Rui Fontes

Sales Manager & Technical Lead
#SPIE EXCELSIUS

+49 160 4933 166
Serhii Khodak

Serhii Khodak

Sales Manager
#SPIE EXCELSIUS

+49 160 9621 7800
Arnulf Thieme

Arnulf Thieme

Sales & Technical
Furnace & Refractory Inspection Specialist
#SPIE FIOS

+49 151 1400 2810
Fabian Strahl

Fabian Strahl

Sales - Nord

+49 151 55445467
Thorsten Nilles

Thorsten Nilles

Sales - Süd

+49 172 7399994
Thomas Gröne

Thomas Gröne

Geschäftsführung

+49 5424/2353-0
Justin Jones

Justin Jones

Managing Director

+1 (859) 276-1570
Martin Skladal

Martin Skladal

Geschäftsführung

+49 170 4501810
Uwe Harlacher

Uwe Harlacher

Sales IMO Anlagenmontagen

+49 172 7399985
Robert Klöpper

Robert Klöpper

Sales IMO Anlagenmontagen

+49 151 52632652
Sebastian Albrecht

Sebastian Albrecht

Leiter Vertrieb

+49 341 9084014
Sascha Herz

Sascha Herz

COO

+49 911 376737-0
Alf Kain

Alf Kain

CEO

+49 911 376737-0
Rim Abdmouleh

Rim Abdmouleh

Sales

+49 172 5113343
Marc Bogenstahl

Marc Bogenstahl

Director Business Development & Sales

+49 6201 503 100
Dirk Nagraszus

Dirk Nagraszus

Geschäftsführer

+49 8031 2960-0
Stefan Stemmle

Stefan Stemmle

Prokurist / Senior Engineer

+49 6241 3093212
Sascha Dilger

Sascha Dilger

Projektleiter Waste Management / Entsorgung

+49 6241 3093213
Maren Bögel

Maren Bögel

Assistenz der Geschäftsführung

+49 89 379090-22
Mark Jansen

Mark Jansen

Sales

+31 627 229 162
Serpil Tuncal

Serpil Tuncal

Sales

+31 621 654 773
Rowan Doorduin

Rowan Doorduin

Sales

+31 624 149 749
Javier Amelivia

Javier Amelivia

Managing Director / SPIE WIND Europe

+34 649 180 735
Tim Petersen

Tim Petersen

Managing Director / SPIE WIND Baltics

+48 669 192 221
Stefanie Weber

Stefanie Weber

Human Ressources / SPIE WIND

+49 421 399 87 470
Jean-Philippe Enzer

Jean-Philippe Enzer

Country Manager France

+33 6 59 21 82 10
Ernesto Mora

Ernesto Mora

Sales / SPIE WIND Lateinamerika

+52 15 5 51 73 63 79
Dennis Mausberg

Dennis Mausberg

Leiter Geschäftsbereich ISW

+49 89 54843970

Are you a media representative and would like to receive further information about SPIE? Then visit the press team of SPIE Germany Switzerland Austria:

Press Contact

May we help you?

Please leave us a message, we will contact you as soon as possible!

Our AI search gets you where you need to go

Our AI-powered search helps you find relevant content faster. Simply enter a question or describe your topic in one sentence.